English
发新主题

[穿越 Across America] 问一下

问一下


请问各位高手穿越可以改钱吗?


不知道额  我也新手 帮顶了

錢改多了.遊戲就不好玩

我现在等钱还货款,所以要改一改,玩过穿越的同志都知到每一周都会亏损.

[ 本帖最後由 aaajh 於 2008-8-3 17:50 編輯 ]


呵呵,能改
我以前玩的时候都用金山游侠
不知道搬运的密码能不能在穿越中使


有我,
你的生活更多财!


================
人生得意须尽欢!!!

金山我不会用


咋办那,我没钱还货款呢?


穿越运货快,运价也高,一个礼拜就可赚几十万,根本不用改钱。

有付出就会有回报! 加油吧!!

先升级到1.10或更高
然后打开:X:\我的文档\18 WoS Across America
用记事本或写字板打开:“config.cfg”

找到uset g_console把0改成1 进入游戏按“~”   数字键1左边那个

输入:

cheat dealers :所有车型
cheat money : 加钱;
cheat drivers :雇佣所有的司机
cheat stars :提高声誉
config.cfg样本(我自己使用的):
# prism3d variable config data

uset r_fullscreen "1"
uset r_mode "1280x1024x32x60"
uset r_device "dx8_0"
uset g_boffy "0"
uset g_boffx "0"
uset g_bsizey "2800000"
uset g_bsizex "2800000"
uset g_mouse_control "0"
uset g_joy_axis_brake_dz "0.0"
uset g_joy_axis_brake "-1"
uset g_joy_ff_gain "1.0"
uset g_joy_axis_throttle_dz "0.0"
uset g_joy_axis_throttle "16"
uset g_joy_axis_ff "0"
uset g_joy_axis_combine "0"
uset g_joy_axis_steer_sens "0.05"
uset g_joy_axis_steer_dz "0.0"
uset g_joy_axis_steer "-1"
uset g_blinkers_auto "0"
uset g_wipers_auto "0"
uset g_trans_auto "0"
uset g_view_dist "1"
uset g_traffic_density "1"
uset g_details "2"
uset g_flyspeed "5000.0"
uset g_traffic "1"
uset g_colbox "0"
uset g_fps "0"
uset g_minicon "0"
uset g_console "1"
uset ds8_mix_channels "2"
uset ds8_mix_depth "16"
uset ds8_mix_rate "44100"
uset ds8_3d_emulated "1"
uset ds8_sfx_enabled "1"
uset ds8_music_enabled "1"
uset ds8_sfx_volume "0.7"
uset ds8_music_volume "1.0"
uset ds8_reverse_stereo "1"
uset gl_quirks "1"
uset gl_sync "0"
uset s_device "ds8"
uset s_mix_channels "2"
uset s_mix_depth "16"
uset s_mix_rate "44100"
uset s_3d_emulated "0"
uset s_sfx_enabled "1"
uset s_music_enabled "1"
uset s_sfx_scheme "0"
uset s_music_scheme "0"
uset s_sfx_volume "1.0"
uset s_music_volume "1.0"
uset s_reverse_stereo "0"
uset i_force_gain "1.0"
uset i_feedback "1"
uset i_joystick2 "-1"
uset i_joystick1 "-1"
uset i_deadzone "0.0"
uset i_use_dinput "1"
uset m_invert "0"
uset m_sensitivity "1.0"
uset m_filter "0"


# prism3d bind config data

bind_cmd f10 "screenshot"
bind_imp 1 "camera_rotate"  
bind_imp 2 "camera1"  
bind_imp 3 "camera2"  
bind_imp 4 "camera3"  
bind_imp 5 "camera4"  
bind_imp 6 "camera5"  
bind_imp 7 "camera7"  
bind_imp 8 "camera8"  
bind_imp q "forward"  
bind_imp w "backward"  
bind_imp e "handbrake"  
bind_imp r "start_engine"  
bind_imp t "attach"  
bind_imp y "detach"  
bind_imp p "service"  
bind_imp enter "cruise_ctrl"  
bind_imp a "wipers"  
bind_imp s "geardown"  
bind_imp d "lblinker"  
bind_imp f "rblinker"  
bind_imp g "gas_pump"  
bind_imp h "4wayflasher"  
bind_imp j "hud_mirror"  
bind_imp c "call911"  
bind_imp v "voice"  
bind_imp b "jukebox"  
bind_imp n "notebook"  
bind_imp m "ingame_map"  
bind_imp space "motorbrake"  
bind_imp f9 "ingame_hud"  
bind_imp num0 "light"  
bind_imp rctrl "jukebox"  
bind_imp uarrow "horn"  
bind_imp pgup "rightmirror+"  
bind_imp larrow "left"  
bind_imp rarrow "right"  
bind_imp darrow "gearup"  
bind_imp pgdn "rightmirror-"  
bind_imp ins "leftmirror+"  
bind_imp del "leftmirror-"  
bind_imp mouseleft "mleft"  
bind_imp mouseright "mright"  
bind_imp mouseup "mlookdown"  
bind_imp mousedown "mlookup"  
bind_imp mouse1 "mleftbut"  
bind_imp mouse2 "mrightbut"  
bind_imp mousewheelup "mwheelup"  
bind_imp mousewheeldown "mwheeldown"

当清风淡淡飘过时,你是否感受到他的存在?

那找1.1啊


 引用框:
原帖由 aaajh 於 2008-8-5 12:06 發表
那找1.1啊
主要的已经给你说了,方向也指给你了,不是什么都做问出来的,那给你找来1.1,你是不是要问怎么装1.1?实践出真知。其实这些问题百度或者谷歌一搜就有了。

当清风淡淡飘过时,你是否感受到他的存在?

H兄正解,有问题,百度一下啊

支持18轮,支持支援站,每天点广告~~~

對了..不要浪費了資源

穿越改钱


进入游戏程序,打开aa用压缩方式打开bease, 打开defs,打开sceners,依次打开五个文件,把里面的money(金钱)后的数字修改,注意!不能超过7位数。
发新主题